How-To Apply an Iron-On Decal

Instructions come with every purchase.

Set your iron to Cotton/Linen setting (usually the highest setting). Make sure the steam setting is OFF for steam irons.

Use the iron to pre-heat the area of the material you will apply your decal to for about 10-15 seconds.

Remove white sheet on the back of the decal, place decal onto the pre-heated material (clear liner should be on top and image should look normal and not backward). Apply medium pressure with iron for 25-30 seconds.

Flip the material over and apply medium pressure with the iron to the back of the material for an additional 25-30 seconds.

Let cool. Remove clear lining. If any of the decal is peeling up put the lining back down and place the iron over that spot again. You also may take off the clear lining and place a piece of fabric or t-shirt over the decal, press the iron over top of the fabric/decal for 10 seconds to make sure everything is sticking correctly. TIP: Do not move the iron around, it may cause a wrinkle in the decal.

*If decal ever comes off you can iron it back on.

**The video describes how I iron on to fabric and is slightly different from the written directions. If you have questions, feel free to contact me!

Check out our custom iron-on decal listing! Any design we sell can be purchased as an iron-on decal or you can create your own then iron it on the fabric of your choice!